I am in search of the necessary programming software and cable to upload a ladder program from a PLC FX-48MR. Can anyone advise on which specific cable and software are required for this task?
I would recommend using GX IEC Developer for programming, but GX Developer or MELSEC Medoc are also suitable options. The cable commonly used for these programming software is the SC09 FX, which can be found for a good price on online marketplaces like eBay.
Thank you for providing this valuable information. Can you provide any details on the cost of the software?
Discover a step-by-step 1000 demo version of GX Developer in our forum discussion at MRPLC. Explore the link below for more information: http://forums.mrplc.com/index.php?showtopic=17220.
Looking to upload a ladder program from a PLC FX-48MR? Miguel Vaquera is in search of the necessary programming software and cable. To successfully connect to this ancient Mitsi PLC, you'll need a F2-20GF1 converter with a SC03 cable. These essential items are as rare as hen's teeth, but with persistence, you can track them down. Keep in mind that the FX series differs from the FX2 and FX3 series in terms of cables used. While FX2 uses the SC09 cable and FX3 uses USB, the FX series is best suited for MEDOC software. When troubleshooting, having a hard copy of the program can be a lifesaver. Best of luck in your search for the right tools to get your PLC up and running smoothly!
Hello everyone, I am a newcomer to this discussion and haven't read the entire thread. However, I do recall a great feature offered by the Mitsubishi FX2n PLC. This PLC allows for seamless connectivity with a Mitsubishi MMI (GOT series) through an RS232 port. By using a simple cross cable with 9 pin connectors on both ends, you can effortlessly access the FX2n through the MMI. This connection can be easily set up in a lab environment. Good luck with your projects!
You'll need the GX Developer software for programming and data management of your FX-48MR PLC. As for the cable, a USB-SC09-FX programming cable should work well. The cable will facilitate the connection between your computer USB interface and the PLC RS422 interface. It's confirmed to work well with FX series PLCs. However, always ensure your software's version compatibility with the PLC and operating system before initiating the connection.
You'll need the GX Developer software and SC-09 serial programming cable for the upload. The GX Developer is Mitsubishi’s programming software and can be ordered online. The SC-09 cable connects the PLC and your programming device, typically a PC. Always keep in mind to verify the system compatibility with Mitsubishi’s specifications to ensure everything runs smoothly.
For the PLC FX-48MR, you'll most likely need the GX Developer software from Mitsubishi as it supports a wide range of Mitsubishi PLCs. As for the cable, the SC-09 programming cable would be your best bet. Both items can usually be found on online platforms like Amazon or directly through Mitsubishi if you prefer authentic channels. Just make sure your PC's COM port matches the cable's configuration to avoid compatibility issues.
You'll need the FX-USB-A, which is the programming cable for the FX series PLCs, along with Mitsubishi's GX Works2 software for programming and uploading your ladder logic. Make sure to check for any latest versions of the software to ensure compatibility with your FX-48MR. Also, you might want to look into forums or user groups for tips on the setup, as they can offer valuable insights from others who've done the same!
For uploading a ladder program from an FX-48MR PLC, you'll need the GX Developer software or GX Works2, depending on your preference and version compatibility. As for the cable, the FX-USB-AW is a reliable choice for communication, as it connects the PLC to your computer via USB. Just make sure you also have the necessary drivers installed to ensure a smooth connection. Good luck with your project!
To upload a ladder program from an FX-48MR PLC, you'll need the FX-COM programming cable, which has an RS-422 interface. For the software, Mitsubishi’s GX Works2 is the go-to option for programming and uploading programs to the FX series. Just make sure your PC has the right drivers installed for the cable, and you should be good to go!
To upload a ladder program from a PLC FX-48MR, you'll need the Mitsubishi GX Works2 software, which is essential for programming and managing Mitsubishi PLCs. As for the cable, the FX-48MR typically requires the Mitsubishi FX USB Programming Cable (part number FX2N-USB-BD) or the standard FX Serial Programming Cable (like the FX3U-USB-BD if you’re using a USB connection). Just make sure to check that your computer has the right drivers installed for the cable!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: - To upload a ladder program from a Mitsubishi PLC FX-48MR, you will need a suitable programming cable that is compatible with the PLC model.
Answer: - The recommended programming software for uploading ladder programs from a Mitsubishi PLC FX-48MR is usually provided by Mitsubishi Electric Corporation. You may need to use software like GX Works2 or GX Developer.
Answer: - When selecting a cable and software for uploading ladder programs from a Mitsubishi PLC FX-48MR, ensure compatibility with the PLC model, proper drivers, and support for communication protocols used by the PLC.
Answer: - You can purchase the required cable and software from authorized Mitsubishi Electric Corporation distributors, online retailers specializing in industrial automation equipment, or directly from the manufacturer's website.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.