Looking to determine the Gear Mesh Frequency (GMF) for a 19-tooth bevel-helical gearbox with a two-stage reduction ratio of 31.5:1, driven by a motor running at 1500 RPM? This specific model is the Eleccon SCN 280, with 61 output teeth and operating at 48 RPM. Any recommendations on how to calculate this?
GearMesh can be calculated by multiplying the rotation speed by the number of teeth, resulting in values of 28500 CPM and 2928 CPM in this scenario.
For calculating the Gear Mesh Frequency (GMF), you need to multiply the rotational speed in RPM by the number of output teeth. Given that the motor runs at 1500 RPM and the two-stage reduction ratio is 31.5:1, the first stage gear would be running at 47.62 RPM (1500/31.5). Therefore, if the first stage gear - let's say has 19 teeth - your GMF would be 47.62*19 = 904.78 CPM (Cycles/Minute). Similarly, you can calculate GMF for the second stage using the speed of 48 RPM and 61 teeth. Please note the specific gear-tooth count for each stage should be accurate for precise calculation. I hope that helps!
Interesting task, I can guide you on that. To find the gear mesh frequency (GMF), you generally need to multiply the number of gear teeth by the RPM of the gear. The first stage will have a GMF of 19 teeth * 1500 RPM = 28500 Hz for the gear attached to the motor. The intermediate gear will run at reduced speed due to the reducer, which is 1500 RPM / 31.5 = 47.62 RPM approximately. On this stage, the GMF will be 61 teeth * 47.62 RPM = 2904.82 Hz. I would recommend rechecking this with your device's manual for more accurate values, as there may be other factors influencing these numbers.
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: - The formula to calculate Gear Mesh Frequency (GMF) is: GMF = (Number of teeth on the pinion + Number of teeth on the gear) RPM / 60.
Answer: - To calculate the Gear Mesh Frequency for an Eleccon SCN 280 bevel-helical gearbox, use the formula: GMF = (19 + 61) 1500 / (31.5 48).
Answer: - Determining the Gear Mesh Frequency is important for monitoring the health and performance of the gearbox. It helps in identifying potential issues such as vibration, noise, and wear in the gear system.
Answer: - When calculating Gear Mesh Frequency for a two-stage reduction gearbox, ensure to account for the reduction ratio of each stage and the number of teeth on both the pinion and gear in each stage. This will provide an accurate representation of the gear meshing frequencies.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.