Compatibility of Programming Cable for Proface HMI Model AGP3301-L1-D24: Can it be Programmed with COM1 or COM2?

26-10-2024
rohit02988
1 comment
123
156

Question:

Hello, I am looking for information on the programming cable compatibility for the Proface HMI Model AGP3301-L1-D24. Can this HMI be programmed using either COM1 or COM2?

Top Replies

When using the Proface cable with a protocol converter, you can utilize the DB-9 serial connection with your COM serial port. If the Proface adapter is USB, it will be recognized in DeviceManager as a serial port and assigned a COM number between 1 to 256. You have the flexibility to change this number in the properties settings to avoid any conflicts with other ports. It is important to note that multiple USB ports can share the same COM number, as long as only one is connected at a time.

27-10-2024
I_Automation

Yes, you can indeed use either COM1 or COM2 for programming the Proface HMI Model AGP3301-L1-D24. However, make sure you set the switch to match the COM port you are using within your software settings before trying to upload or download any programs. Also, remember that you will need the GP-Pro EX programming software. Be aware, though, that this model is slightly older, so newer versions of the software might not support it. Always check the compatibility.

09-01-2025
Mason Powell

More Replies →

Streamline Your Asset Management
See How Oxmaint Works!!

✅ Work Order Management

✅ Asset Tracking

✅ Preventive Maintenance

✅ Inspection Report

We have received your information. We will share Schedule Demo details on your Mail Id.

Frequently Asked Questions (FAQ)

FAQ: 1. What programming cable is compatible with Proface HMI Model AGP3301-L1-D24 for programming?

Answer: Answer: The Proface HMI Model AGP3301-L1-D24 can be programmed using a specific programming cable that is compatible with the device. It is important to use the correct programming cable to ensure successful programming.

FAQ: 2. Can the Proface HMI Model AGP3301-L1-D24 be programmed using COM1 or COM2?

Answer: Answer: Yes, the Proface HMI Model AGP3301-L1-D24 can be programmed using either COM1 or COM2. Make sure to configure the communication settings accordingly in the programming software to establish a successful connection.

FAQ: 3. How do I set up the communication settings for programming the Proface HMI Model AGP3301-L1-D24 using COM1 or COM2?

Answer: Answer: To program the Proface HMI Model AGP3301-L1-D24 using COM1 or COM2, you will need to configure the communication settings within the programming software. Refer to the user manual or documentation provided by Proface for detailed instructions on setting up the communication parameters.