Hello, I am currently configuring the Analog input card channels for 4-20mA and 0-20mA in Studio5000. I am having trouble finding the percentage range values in the configuration tab. Does anyone know where I can locate this information? Thank you in advance.
Could you provide more details on the specific module you are configuring? The configuration settings may differ between modules.
I am currently working on scaling analog inputs for the 1769-IF8/A module.
If you are looking for input value range options, there are four choices available. The installation manual provides an overview of these options, but does not delve into the specific values. For detailed explanations and values associated with each option, refer to chapter 3 of the user manual found here: https://literature.rockwellautomation.com/idc/groups/literature/documents/um/1769-um002_-en-p.pdf. This resource will provide you with a better understanding of the available input range choices.
expressing gratitude
Hey there, I've encountered a similar issue before. If you're using a 1756-IF8 card, the percentage range values can be tricky to locate. Try going to the channel properties, then under the 'Input' tab, select 'Scaling.' Here, you should be able to put in your raw Min/Max and Engineering Min/Max, which should correspond to the 4-20mA or 0-20mA range you're working with. Let me know if that helps!
Sure, I can help with that. In Studio5000, you should navigate to the I/O Configuration in the Controller Organizer. Then, find your Input Card under the Chassis Monitor and double-click on it. A new pop-up window will appear detailing the Channel properties. Here, you'll find the configuration options you're seeking, including ranges for both 4-20mA and 0-20mA.
Hi there! It sounds like you're looking to scale your analog values. In Studio5000, you typically don't configure percentage ranges in a tab, but instead write code which scales your input. For example, to scale 4-20mA input to a 0-100% range, you would first convert the raw input to mA and then map this to your desired percentage range. Check the input module's documentation too, it should provide further details concerning interpreting the raw data. Hope this helps!
Hey! In Studio5000, when you’re configuring your Analog Input card for the 4-20mA or 0-20mA ranges, you should see an option for scaling in the configuration tab. Look for the "Input Signal" settings where you can define the low and high range values—this is where you can set your percentages. If you’re still having trouble, check the help section in the software as it often provides specific guidance on setting those ranges accurately. Hope this helps!
Hey! When you’re configuring the analog input channels in Studio5000, you should be able to find the scaling settings in the “Properties” of the module you’re working with. Look for a section labeled "Input Scaling," where you can set the engineering units and the corresponding percentage range. If you're still having trouble, make sure you have the correct module type selected, as the options can vary depending on the specific card you have. Let me know if you need more help!
âś… Work Order Management
âś… Asset Tracking
âś… Preventive Maintenance
âś… Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Question: Where can I find the percentage range values for configuring Analog input channels for 4-20mA and 0-20mA in Studio 5000? Answer: The percentage range values can usually be found in the configuration tab of Studio 5000. If you are having trouble locating them, you may need to check the specific documentation or user manual for the Analog input card you are working with.
Answer: Answer: The percentage range values are crucial for accurately interpreting the analog input signals and converting them into meaningful data in Studio 5000. They help establish the relationship between the physical input signal (4-20mA or 0-20mA) and the corresponding digital values.
Answer: Answer: If you are unable to locate the percentage range values in the configuration tab, consider reaching out to the manufacturer of the Analog input card for guidance. They should be able to provide you with the necessary information or support to properly configure the channels.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.