Hello everyone, I am currently configuring an Information message in FactoryTalk View ME. I am utilizing the default information display and would like to ensure that both the Acknowledge and Close buttons perform the same actions, such as unlatching an OTL in my PLC. I am considering either removing the Acknowledge button or making it close the display for added functionality. While creating new buttons is an option, I find it more enjoyable to experiment with the existing features. Any suggestions on how to achieve this would be greatly appreciated. Thank you.
While I may not be an expert on Painelview Plus, I understand that if you wish to link multiple functions to a single button, you should consider utilizing a "Macro" button object. This feature can be found in the Advanced section of the Objects menu, rather than under "Push buttons." To create a Macro, you will need to navigate to the Log and Control category in the project explorer and assign it to the button action accordingly. This method allows for greater customization and efficiency in programming your Painelview Plus device.
Jamesgsummers asked for assistance in setting up an Information message in FactoryTalk View ME. He wants the Acknowledge button and Close button to perform the same action or potentially remove the Acknowledge button altogether. The primary goal is for both buttons to release an OTL in the PLC, with the Acknowledge button also closing the display. While considering simply creating new buttons, James wants to explore other options for added enjoyment. Any recommendations from the community would be appreciated. One suggestion is to link everything to a tag in the program and configure the Acknowledge and Close functions to the same tag. This can typically be done in the trigger settings section for alarms and global connections.
I am of the opinion that a Close Display button has the capability to not only close the display it is on but also write a specific value to a tag when pressed. This functionality enhances user experience and allows for seamless navigation within the system.
In my revision, I decided to eliminate the Ack and Close buttons and instead added an interlocked push button labeled "ack." The message is displayed through an OTL in the PLC, which is linked to the interlocking push button. When the OTL is triggered by a certain condition, the message appears. Pressing the interlocked push button releases the OTL, causing the message pop-up to close automatically. While this setup may not be suitable for multiple information messages, it is effective for the singular message used in this particular process. It turns out, I was simply overanalyzing the situation.
Hey there! I totally get your curiosity in tinkering with the existing features. As far as I know, FactoryTalk View ME doesn't allow changes to the functionalities of the Acknowledge and Close buttons; they have predefined roles. Nonetheless, you can create a visibility animation linked to the bit that the message is assigned to. With this, even if the popup is closed or acknowledged, the bit stays latched until the root cause is addressed. Remember, while the flexibility of creating new buttons may seem a bit tedious, it provides more nuanced control which could be beneficial in the long run. Good luck!
Hey there! It sounds like you’re on the right track with wanting to streamline your display functionality. If you want both buttons to perform the same function, you could set the ‘Close’ button’s action to include your OTL unlatching logic and keep the ‘Acknowledge’ button too, just in case someone presses it. This way, users still have the option to acknowledge the message while ensuring the OTL unlatches no matter which button is pressed. You can also check if the default button actions can be customized in the properties; sometimes there are simple tweaks that can yield better results without creating new buttons. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. How can I make both the Acknowledge and Close buttons in FactoryTalk View ME perform the same actions? - You can achieve this by adjusting the settings to either remove the Acknowledge button or make it close the display. Experimenting with the existing features can help you customize the functionality according to your requirements.
Answer: - Yes, you can configure the Acknowledge button in FactoryTalk View ME to also act as a button to close the display. This customization allows you to enhance the user experience and streamline the interaction with the information message.
Answer: - While creating new buttons is an option, you can also experiment with the existing features in FactoryTalk View ME to customize the behavior of buttons like Acknowledge and Close. This approach can provide flexibility and allow for a more engaging configuration process.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.