Hello everyone! I previously asked a similar question but thought it was best to create a new topic. I'm currently working with a MicroLogix 1400 (ML1400) and a Weintek MT8071iE, and I've connected them through an Ethernet hub (using ML1400 Channel 1). I've reviewed the PLC connection guide in the manual, but I'm uncertain about the appropriate configuration options, which I've included in the image below. Since this is all over Ethernet and involves a MicroLogix (rather than a CompactLogix or ControlLogix), am I overlooking something? Any insights would be greatly appreciated. By the way, everything is pinging smoothly! Thank you in advance for your help.
Subject: Connecting Weintek to ML1400 via Rockwell EtherNet/IP (DF1) Hello, To establish a connection between the Weintek device and the ML1400, please utilize Rockwell EtherNet/IP with the DF1 protocol, as depicted in the attached image. Best regards,
I completely agree with that!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: - Verify that the correct communication protocol is selected in both the PLC
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.