I am currently managing two projects concurrently - one utilizing RSLogix500 and the other with RSLogix5000 on the same network. Is there a way to connect and display the output from RSLogix500 to RSLogix5000 on the Factory Talk screen? This will allow for seamless monitoring and control across both platforms.
To enhance communication between your RSLogix5000 PLC and RS500 PLC, consider setting up a recurring task in your PLC programming software. By utilizing messages within this task, you can easily retrieve data from your RS500 PLC, especially if it is connected via Ethernet within the same network. For more information on establishing SLC to ControlLogix communication, be sure to search for relevant discussions on this forum.
The PanelView Plus "Standard Performance" models are limited to connecting to a single PLC, while a FactoryTalk View SE desktop/networked system or a Performance model PanelView Plus can connect to multiple controllers simultaneously. To transfer data from an SLC/MicroLogix controller to a ControlLogix, simply utilize Data Table Read functions along with a Message (MSG) instruction for seamless communication.
Yes, you can connect both the RSLogix 500 and RSLogix 5000 to the same FactoryTalk ViewStudio application for monitoring. FactoryTalk provides a data server, RSLinx Enterprise, which supports direct communication to both platforms. First, you'll need to configure your communications setup within RSLinx to include both processors. Then, within FactoryTalk, tie your tags to the correct OPC topics/path to display them on the HMI. It might take some tweaking for seamless operation, but this setup should enable you to monitor both platforms concurrently.
Connecting RSLogix500 and RSLogix5000 in a FactoryTalk environment can be tricky since they utilize different communication protocols, but it's definitely possible with the right setup. One approach is to use a OPC server that can bridge data between the two platforms. This way, you can map the tags from your RSLogix500 project to the FactoryTalk environment, allowing you to visualize and control outputs seamlessly on the same screen. Just ensure that your network configuration supports the data traffic and always keep latency in mind for real-time applications!
Yes, it’s definitely possible to display output from RSLogix500 on RSLogix5000 through FactoryTalk View, but you'll need to set up a communication interface between the two systems. One common method is using OPC (OLE for Process Control) to facilitate data exchange between the two PLCs. You can create tags in FactoryTalk that point to these OPC items, allowing for real-time monitoring and control. Just make sure that your network configurations are set correctly so that they can communicate without issues. It's a bit of setup, but it can really enhance your ability to manage both projects efficiently!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: Answer: Yes, it is possible to connect and display the output from RSLogix500 to RSLogix5000 on the Factory Talk screen, enabling seamless monitoring and control across both platforms.
Answer: Answer: Integrating RSLogix500 and RSLogix5000 allows for centralized monitoring and control of projects utilizing different platforms, enhancing efficiency and convenience for operators.
Answer: Answer: To enable communication between RSLogix500 and RSLogix5000, you can utilize communication modules or protocols supported by both platforms, such as OPC (OLE for Process Control) or Ethernet/IP.
Answer: Answer: It's important to ensure that the versions of RSLogix500 and RSLogix5000 being used are compatible with the Factory Talk software, and that appropriate network settings and configurations are in place for seamless integration.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.