1- I have enabled detailed creation and assigned a saved widget name to it, along with setting a data element to the page. However, when binding the widget, the specified widget doesn't load, resulting in missing bindings. Can you advise on the correct usage of this feature? 2- On the details page, how can I access tags from the host calling widget scope? I assumed it would be ^.tagName, but since the popup isn't functioning, I'm unsure. 3- How do you manage setpoints effectively? Users want a color-coded representation for quick issue identification. Each sensor has 5 pieces of information requiring alarm and warning setpoints, along with the entire asset needing a running trigger and asset runtime totalizer. I planned on using popups for this, but encountered issues with their functionality. 4- Is there a way to filter the alarm or event viewer to display only the alarms shown on the current trend? With 16 assets and 10 alarms each, the screen becomes overwhelming with information.
Looking for tutorials on creating and using Widgets? Check out these informative videos: https://www.youtube.com/watch?v=9OWZubkje5w and https://www.youtube.com/watch?v=5WHB2UcS154.
The Crimson 3.2 software is essential for programming FlexEdgeâ„¢ controllers, a versatile tool for industrial automation. Apologies for the delay in responding; could you clarify the purpose of a FlexEdge controller for me? Upon visiting the website, it appears to function as a switch with the capability to add I/O, although I couldn't locate any mention of an HMI interface.
I have watched various tutorials to learn about creating popup systems, but none have fully explained the intricacies of the process.
One feature of the FlexEdge controllers is their virtual Human-Machine Interface (HMI). I am currently utilizing the DA50A model without any IO expansion, along with a wifi access point card for connectivity.
While I have viewed various tutorials and gained some knowledge, none of them have thoroughly explained how to create a popup system in Crimson 3.1. Although I have never utilized it myself, I am willing to explore and troubleshoot any issues you may be experiencing with this feature.
Hi there! It sounds like you're juggling a few complex things simultaneously. Regarding the binding issue with the widget, double-check your commands for syntax errors or misconfigurations. Sometimes, the smallest typographical error could be the culprit. Secondly, for accessing host calling widget scope tags, ^.tagName would be the typical route. The malfunction of the popup might be throwing it off so, once that's resolved, this should work. To manage setpoints effectively and cater to the request of color-coded representation, consider using color change scripts tied with the alarm and warning setpoints you mentioned. Moreover, for your alarm or event viewer query, filters can be applied to display only specific alarms on current trends in most systems. Thoroughly examine your system's documentation or help sections for instructions on your particular system. On a concluding note, it is crucial not to ignore the importance of getting your popup functionality sorted first.
It sounds like you're dealing with a few complex issues here. Regarding your widget problem, make sure you've correctly initialized and bound the widget within the appropriate scope and context. For the tag issue, bear in mind that ^tagName usually references the parent scope, not the host widget per se. To access the tags from the calling widget, you might need to pass data via a method or event. In terms of setpoints management, it might be useful to structure them in a tiered format where top-level assets have overarching setpoints that trigger an overview of which sensor information falls within warning or alarm parameters. You could use color-coded headings for immediate visual cues. If popups persist in malfunctioning, consider using modals or sidebars as an alternative to display detailed data. Finally, to manage an overwhelming alarm or event viewer, applying filters can be beneficial. You may need to set up a filter component that correlates with the trend currently displayed. This way, you limit the scope of your alarm output and make it easier for users to efficiently digest the data. Remember, the aim is to create an intuitive UI that aligns with your users' needs and expectations.
1- In debugging widget binding issues, first check if your widget name is correctly assigned and if your data element is correctly set up. Also, ensure your widget is correctly referenced during the binding process. 2- To access tags from a calling widget's scope, usually, you'd use the ^.tagName notation. The issue with the popup might be unrelated to this. Try debugging the popup functionality separately. 3- Setpoints can indeed be quite complex. For color-coded representation, ensure the setpoints are properly configured, and try using CSS to apply different colors based on the range of values. Popups can help; just make sure they're functioning correctly. 4- For the alarm/event viewer, a filter functionality should ideally be available to display specific data. If the software doesn't support this, you might want to think about getting a custom feature developed or using third-party applications that offer such options. Always remember that interface clarity is essential in data-heavy applications.
These are quite detailed questions! Let's tackle them one at a time: 1- When binding the widget, ensure you've set up saved widgets correctly, consider re-checking the widget parameters and data element definitions. Sometimes it's a small typo that throws the whole process off. 2- The exact method might vary based on the widget design, but usually under the widget instance, you should be able to access via 'this.parentScope'. 3- For managing setpoints, using color codes is a great approach. You’ll want to look into conditional styling depending on the specific platform you're using. Monitor both the individual sensor values and the overall asset runtime using separate alerting setpoints, which can allow for more nuanced condition monitoring. 4- The feature to filter specific alarms directly in the alarm or event viewer can highly depend on the software you're using, but often there's some kind of filtering or sorting functionality – more often by severity or timestamp, though. Do check the platform's documentation or support, as this would significantly enhance the User Experience (UX).
It sounds like you’re dealing with quite a few complex issues! For the widget binding problem, make sure the widget name in your configuration exactly matches the saved widget name, as even a small typo can lead to it not loading. Regarding accessing tags, sometimes using `^.tagName` can be finicky based on the context, so double-check the scope and make sure you're calling it from the right level. For the setpoints, a color-coded system sounds like a great idea for quick identification; maybe consider creating a dashboard with visual indicators rather than popups, as they seem to be causing trouble. Lastly, filtering the alarm viewer by current trends could be done by creating a custom view or applying a filter based on active assets and their alarms. That should help keep your screen less cluttered and more manageable!
It sounds like you're dealing with quite a few challenges! For the widget binding issue, double-check the naming conventions and ensure there are no typos because even a small mistake can prevent it from loading. Regarding accessing tags in the host widget scope, you might also want to try using a more specific notation, like `parent.tagName`, to see if it helps with your popup problem. Managing setpoints can definitely get complicated; have you considered using a dashboard that visually represents these in real-time? It might streamline things more effectively than popups. Lastly, for filtering alarms, a custom filter view based on your current trends would be helpful, if your platform allows for that—it's all about reducing clutter wherever you can!
It sounds like you're running into a few common challenges with your setups! For the first issue, I suggest double-checking if the widget bindings are correctly linked in your configuration; sometimes it helps to refresh the page or clear the cache to see if that resolves the loading glitch. Regarding accessing tags from the calling widget, if you're having trouble with the expected syntax, make sure the widget context is correctly scoped, as there might be some nesting affecting it. As for managing setpoints visually, using a dashboard approach with color-coded indicators could definitely help; tools like conditional formatting or customized alerts might be worth exploring. Lastly, to filter your alarms effectively, consider creating a custom view or leveraging tags to narrow down what displays based on your active trends—it can make a huge difference in reducing clutter! Keep experimenting, and I hope you find a solution that works for you!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. How can I correctly use the detailed creation feature in Crimson 3.2 for widget binding? - To correctly use the detailed creation feature and ensure proper widget binding, make sure to follow these steps: - Enable detailed creation and assign a saved widget name to it. - Set a data element to the page. - When binding the widget, ensure that you are selecting the correct widget for binding. If the specified widget doesn't load, it may result in missing bindings.
Answer: - To access tags from the host calling widget scope on the details page, you can use the syntax ^.tagName. However, if the popup functionality is not working as expected, you may encounter difficulties in accessing the tags. Ensure that the popup functionality is properly configured for seamless tag access.
Answer: - To manage setpoints effectively in Crimson 3.2 and provide a color-coded representation for quick issue identification, consider the following: - Each sensor having 5 pieces of information requiring alarm and warning setpoints. - The entire asset needing a running trigger and asset runtime totalizer. - If planning to use popups for this purpose, ensure that the popup functionality is working correctly to avoid issues with setpoint management
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.