Guide to Upgrading Siemens S7-1200 CPU 1215C Firmware from v3.0 to v4.5

Question:

Hello experts, I am interested in upgrading the firmware on my S7-1200 CPU 1215C from v3.0 to v4.5. Is it possible to go directly from v3.0 to v4.5, and are there any precautions I should be aware of before proceeding with the upgrade? Thank you for your assistance. Best regards.

Top Replies

Do you know the specific part number for the Programmable Logic Controller (PLC)? I attempted to upgrade to version 4 firmware, but it seems to only be compatible with version 4 or newer. As a result, I am unsure if the upgrade is possible for my PLC.

The item in question is the 6ES7 215-1AG40-0XB0, a commonly searched for product in the field of industrial automation.

The 6ES7 215-1AG40-0XB0 is a version 4; please ensure you have the correct version v3.0 firmware installed. So far, I have not encountered any issues with this PLC, except for the challenge of locating the firmware on the Siemens website. Upgrading is a simple process - just go to Online and Diagnostic, select firmware upgrade, and upload the unzipped file. Be cautious to avoid installing the wrong firmware on the PLC, as the system will prevent you from doing so.

We appreciate the valuable information provided!

According to a Siemens article/FAQ, it is not possible to upgrade from v3.x to v4.x in STEP 7 (TIA Portal) when replacing an S7-1200 V3 with an S7-1200 V4. The firmware of the S7-1200 CPU modules can only be upgraded from V.1x to V2.x. Upgrading firmware from V2.x to V3.x or V3.x to V4.x is not supported. Each firmware version (V2, V3, V4) requires specific CPU hardware for compatibility.

Absolutely, you can upgrade directly from v3.0 to v4.5 on your S7-1200 CPU 1215C — there's no need to incrementally update through each firmware version. However, ensure that your TIA Portal totally supports v4.5 to avoid compatibility issues. It's also crucial to back up your current configurations/data before performing the upgrade, in case something goes wrong during the process. This would allow you to restore your settings to the previous stable state. Also, remember to verify your hardware compatibility with v4.5 before proceeding. Good luck with the upgrade!

Hi there! Upgrading directly from v3.0 to v4.5 is indeed possible, given that Siemens does support direct firmware updates. Nonetheless, always err on the side of caution - it is crucial to firstly back up your current configuration/settings to avoid possible data loss in the event of an upgrade hiccup. Also, pay extra attention to the release notes for v4.5, as they usually contain important information about new features and any potential issues that may arise during the update. Lastly, ensure all related softwares, like TIA Portal, are also appropriate versions to maintain compatibility. Happy upgrading!

Yes, you can indeed upgrade directly from v3.0 to v4.5. However, please ensure that you have a backup of your current configuration before proceeding, as firmware upgrades carry a risk of data loss. Additionally, you should examine the release notes or upgrade documentation for v4.5 to be aware of any changes that might affect your existing setup. Remember, upgrade during off-hours or in a testing environment first to minimize business disruption if something goes amiss. Good luck with your upgrade!

Hi there! Yes, it is possible to directly upgrade from v3.0 to v4.5. However, it's vital to back up your project before starting the firmware upgrade for safety reasons. Also, keep in mind that once the firmware is updated, it cannot be downgraded to a previous version. Make sure the PLC is in STOP mode before you begin, to avoid interrupting any existing processes. Lastly, check the compatibility of your modules and communication processors with the new firmware, as upgrading could potentially cause these to stop working if they're not supported. Good luck with your upgrade!

More Replies →

Streamline Your Asset Management
See How Oxmaint Works!!

✅   Work Order Management

✅   Asset Tracking

✅   Preventive Maintenance

✅   Inspection Report

We have received your information. We will share Schedule Demo details on your Mail Id.

To add a comment, please sign in or register if you haven't already..   

Frequently Asked Questions (FAQ)

FAQ: FAQs:

Answer: 1. Can I upgrade directly from firmware v3.0 to v4.5 on my Siemens S7-1200 CPU 1215C? - Yes, it is possible to upgrade directly from firmware v3.0 to v4.5 on the S7-1200 CPU 1215C.

FAQ: 2. What precautions should I consider before upgrading the firmware on my Siemens S7-1200 CPU 1215C?

Answer: - Before proceeding with the upgrade, it is recommended to backup your existing program and data, ensure compatibility of the new firmware with existing hardware and software, and follow the manufacturer's instructions carefully.

FAQ: 3. Are there any specific steps or guidelines to follow for upgrading the firmware on the Siemens S7-1200 CPU 1215C?

Answer: - Yes, it is advisable to refer to the official documentation provided by Siemens for step-by-step instructions on how to upgrade the firmware on the S7-1200 CPU 1215C safely and effectively.

Ready to Simplify Maintenance?

Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.

Request Demo  â†’