I am attempting to include a 1794-IF8IH module in the I/O Configuration of RSLogix 5 (version 10.00.00 CPR9), but it does not appear in the available options. Is it possible to update the configuration list with a file that includes this module?
The I/O configuration in RSLogix 5 serves primarily as a documentation tool and does not affect the PLC's functionality. While not essential for operation, it can be beneficial for programmers as it enables the editor software to prompt the appropriate configuration settings for different modules. It is important to properly set up the remote I/O channel with the correct size for all connected hardware and manually input all addresses accordingly.
I think that your RSLogix 5 version might be the issue here. The 1794-IF8IH module may not be supported in this older version. I suggest checking to see if there have been any updates or patches for your software since there might have been changes added for this specific module in later versions. It's always a good idea to keep your software up-to-date in order to ensure compatibility with newer hardware modules. If no updates are available, you might need to consider upgrading to a newer version of the software.
It's possible that your module isn't appearing because it's not supported by the version of RSLogix 5 that you're currently using. I recommend checking the release notes or user manual associated with your version to see if the 1794-IF8IH module is indeed compatible. If it is, you might need to install a firmware update or an EDS file that corresponds to your module. You can usually find these on the manufacturer's website. Hope this helps!
It sounds like you may have an intake issue with RSLogix 5. One solution I found that might help is to make sure your version has the capability to cover that specific module. Unfortunately, RSLogix 5 (version 10.00.00 CPR9) might not natively support the 1794-IF8IH module. If an upgrade isn't in the cards, perhaps looking into using an alternate module with similar functionality can serve as a workaround.
It sounds like you might be dealing with an outdated version of RSLogix 5. The 1794-IF8IH module might not be supported in such an old version. My recommendation would be to always keep your software up to date to ensure compatibility with newer hardware modules. If updating the software is not possible due to system constraints, refer to the software documentation or the Rockwell Automation technical support for possible workarounds or custom configuration files that may be compatible with the 1794-IF8IH module.
It sounds like you're dealing with a compatibility issue since RSLogix 5 might not have the latest module configurations available out of the box. You could check if Rockwell Automation has a hardware add-on or an update file for your version of RSLogix that includes the 1794-IF8IH module, or you could manually add the module by editing the appropriate configuration files, though that can be a bit tricky. Another option may be to consider upgrading to a newer version of RSLogix where enhanced support for newer modules is likely included.
It sounds like you're facing some compatibility issues with RSLogix 5 and the 1794-IF8IH module. Unfortunately, RSLogix 5 is quite limited in terms of module support for newer additions, especially if they were released after the software version you're using. While you can't directly update the configuration list with new modules, you could try checking for any firmware updates for RSLogix or explore creating a custom module configuration if your version allows for it. Additionally, consider reaching out to Rockwell Automation support or their forums, as they might provide a workaround or additional support for integrating that specific module. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Question: How can I add a 1794-IF8IH module to the I/O Configuration in RSLogix 5 if it does not appear in the available options? Answer: If the module is not showing up in the available options, you may need to update the configuration list with a file that includes this specific module.
Answer: Answer: The discussion mentions using RSLogix 5 version 10.00.00 CPR9, but it's important to ensure that this version does indeed support the 1794-IF8IH module.
Answer: Answer: Yes, there may be specific steps or procedures you need to follow to successfully add the 1794-IF8IH module to the I/O Configuration in RSLogix 5, especially if it's not appearing in the available options by default.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.