How to connect Ethernet-only PanelView Plus to SLC 5/04 without upgrading to SLC 5/05

14-01-2025
psychosunshine
16 comments
5499
277

Question:

Looking for solutions to link an Ethernet-only PanelView Plus to a SLC 5/04 without the need for an upgrade to a SLC 5/05?

Top Replies

During my previous job, we invested in a high-quality DH485 to Ethernet converter box. I recommend searching for reputable brands online to find the best option for your needs. Unfortunately, I can't recall the specific brand we used. - James

15-01-2025
James Mcquade

The 5/04 PLC features an RS232 port that can be easily configured for DF1 or DH485 protocols. Consider utilizing a 1761-NET-ENI module with this port for connectivity. While the exact price of a 5/05 PLC is uncertain, the cost may not be significantly higher than the 5/04. It could be more expensive to convert DH+ ports to Ethernet compared to investing in a 5/05 PLC. A popular solution for this conversion is the ControLogix Gateway, which includes a 4-slot CLX rack, power supply, ethernet module, and DHRIO module, but this option comes at a higher price point. You may find success with alternatives like the Anybus Communicator gateway or options from companies like Icomtech Inc.

15-01-2025
dmroeder

Learn how to connect your PanelViewPlus to an SLC504 serial port using a USB to serial adapter by referring to a helpful technote. This resource from Rockwell Automation provides step-by-step instructions on utilizing a USB port on the PanelViewPlus for this connection. Access the technote on TechConnect here: https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/900839/loc/en_US#__highlight.

16-01-2025
alan_505

In a forum thread, alan_505 mentioned a technote detailing how to utilize a USB port on the PanelViewPlus using a USB to serial adapter to connect to the SLC504 serial port. The link provided directs to the relevant information. This solution requires TechConnect access. Click to expand for more details. Great tip!

16-01-2025
dmroeder

For a high-quality, cost-effective replacement Ethernet cable for Allen Bradley PLCs in DF1 mode, visit our website at plccable.com. Our aftermarket cables are designed to meet the same standards as the original Allen Bradley cables without the high price tag. Click the link to buy now!

16-01-2025
Mickey

You might want to consider using a Data Highway Plus (DH+) to Ethernet gateway. This solution allows the PanelView Plus to communicate with the SLC 5/04 over Ethernet through the DH+ port. ProSoft Technology and Real Time Automation are a couple of companies who offer this type of gateway. Always ensure you consult the manufacturers to verify compatibility with your exact models.

24-02-2025
Paul Martinez

Have you considered using a third-party Ethernet to DF1 gateway? These devices can facilitate communication between your Ethernet-only PanelView Plus and the SLC 5/04 by converting the protocols, allowing you to maintain your current setup without the need for an upgrade. Just make sure to check compatibility with your specific panel and PLC configuration!

05-03-2025
Maria Perez

More Replies →

Upon further review, Mickey has decided to retract his previous choices and instead opt for an aftermarket replacement Ethernet for DF1 manufactured by Allen Bradley. To view the product, click on the following link: https://www.plccable.com/allen-brad...s-b-aftermarket-replacement-ethernet-for-df1/

17-01-2025
dmroeder

Exploring the USB to serial port feature has piqued my interest. Previously, I was unaware of this option. However, in many scenarios, the serial port is already in use by a drive or another device. Considering the DH+ alternative, I found that the current price for a new SLC 5/05 is exceeding $12,000 USD. While browsing, I came across some adapters that caught my eye. I am eager to hear feedback from individuals who have hands-on experience with either of these options. I recently stumbled upon two adapters, the Prosoft AN-X2-AB-DHRIO and the Automation Networks anc-100e, although I have yet to test them personally.

18-01-2025
psychosunshine

Exciting news: upgrading from PV550 to PV+7 on an Slc5/04 is now more cost-effective! Previously, we relied on expensive Prosoft An-X2 units for this, but no longer. Recent updates now allow for the use of a USB lead, as confirmed with RA. We are eager to try out the new serial connection method.

18-01-2025
andy_1983

Mickey provided a helpful link to an aftermarket replacement Ethernet for Allen Bradley PLCs. Thanks Mickey! Psychosunshine expressed interest in adapters and sought advice from experienced users. If you're looking for a DH+ gateway solution, consider the one available on our website. Visit the link for more details: https://www.plccable.com/ethernet-i...ighway-plus-dh-gateway-converter-ethernet-ip/

18-01-2025
geniusintraining

An individual in training mentioned the need for information on a DH+ gateway. Consider checking out the one available for purchase here: https://www.plccable.com/ethernet-i...ighway-plus-dh-gateway-converter-ethernet-ip/. I am curious about this gateway device. One challenge we face with our current legacy PLCs and OPC applications is the transmission of data from the PLC to the OPC server through unsolicited messages. Can this device address that issue? After reviewing the manual, I noticed a feature for address mapping, which allows you to configure data transmission from an HMI to a PLC by specifying that data sent to a particular IP address should be forwarded to a specific DH+ address. Does this device also support data transmission from the PLC to an HMI/OPC system?

18-01-2025
JesperMP

JesperMP expressed his interest in the innovative gateway device. One issue we encounter with our current legacy PLCs and OPC applications is the transmission of data from the PLC to the OPC server through unsolicited messages. Does this device support such functionality? Upon reviewing the manual, I discovered an address mapping feature that allows for the setup of data transmission from an HMI to a PLC. You can specify that data sent to a specific IP address is forwarded to a specific DH+ address. Does this feature also work in reverse, from PLC to HMI/OPC? For more information, you can refer to a paper on a Matrikon OPC server that delves into the HMI feature on a Data Highway Plus network. Additionally, you can explore more application notes on the ANC website. I intend to reach out to their tech support for clarification. If you were nearby, I would have sent you a demo to try out. Note: It appears that Phil is currently blocking them.

19-01-2025
geniusintraining

User alan_505 mentioned a technote detailing how to utilize a USB port on a PanelView Plus using a USB to serial adapter to connect to the SLC504 serial port. Access to the solution requires TechConnect sign-in. Unfortunately, the answer has been removed. Is there anyone who has saved it and is willing to share it with us?

19-01-2025
topiasl

Looking for a cost-effective Ethernet replacement for Allen Bradley 1761-NET-ENI Series D? Look no further! Our aftermarket Ethernet cables are perfect for DF1PLC Systems, PLC Trainers, and Industrial Automation Supplies. Visit www.plccable.com for more information.

19-01-2025
Scottryan03

Yes, the information is still available, but you must have a TechConnect contract in order to access it. To locate it, simply log into the Knowledgebase and search for QA29511.

19-01-2025
alan_505

In my previous workplace, a colleague utilized a Prosoft module to establish a connection between a newer PV+ and a PLC5 using DH+ protocol. With my past encounters with PV+ HMIs and insights gathered from various discussions online, I have reservations about relying on a USB-RS232 adapter for long-term use, even if it initially proves successful. It is indeed true that the ProSoft module comes at a high cost, prompting the search for alternative solutions. While it has been a while since I had to replace an HMI on DH+, I recall Uticor offering a model that seamlessly integrates into the system. As the sole "aftermarket" HMI provider supporting DH+ protocol at the time, they are definitely a viable option to explore.

19-01-2025
joseph_e2

If you are in need of DH+ HMI Touch Panels AB replacements, look no further than Joseph_E2. Our company specializes in manufacturing HMI Touch Panels AB that are able to communicate with DH+ or Remote IO systems. We offer Direct Allen Bradley Drop-in Panelview Replacements that are compatible with Modbus Plus, making us the ideal solution for your automation needs. Visit our website at www.ezautomation.com.au for more information and to browse our products.

19-01-2025
alan_505

Streamline Your Asset Management
See How Oxmaint Works!!

✅ Work Order Management

✅ Asset Tracking

✅ Preventive Maintenance

✅ Inspection Report

We have received your information. We will share Schedule Demo details on your Mail Id.

You must be a registered user to add a comment. If you've already registered,
sign in. Otherwise, register and sign in.

Frequently Asked Questions (FAQ)

FAQ: 1. Can I connect an Ethernet-only PanelView Plus to a SLC 5/04 without upgrading to SLC 5/05?

Answer: Answer: Yes, there are solutions available to establish a connection between an Ethernet-only PanelView Plus and a SLC 5/04 without requiring an upgrade to SLC 5/05.

FAQ: 2. What are some possible methods or devices that can facilitate the connection between the PanelView Plus and SLC 5/04?

Answer: Answer: Some options include using a communication module or converter to bridge the gap between the Ethernet capabilities of the PanelView Plus and the requirements of the SLC 5/04.

FAQ: 3. Are there specific communication modules or converters recommended for this type of connection?

Answer: Answer: Yes, there are various communication modules or converters designed for this purpose that can help establish communication between Ethernet-only devices like the PanelView Plus and legacy controllers like the SLC 5/04.

FAQ: 4. What factors should be considered when selecting a communication solution for connecting the PanelView Plus to the SLC 5/04?

Answer: Answer: Factors to consider include compatibility, ease of installation, reliability, and any specific requirements or constraints of the existing setup to ensure a successful connection without the need for upgrading the controller.

Ready to Simplify Maintenance?

Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.

Request Demo →