Encountered an old Schneider PLC model PC-E984-265 at my workplace. After researching online, I discovered that it is typically programmed using Concept software. However, I struggled to establish a connection and had to contact Schneider tech support for assistance to no avail. To my surprise, it was actually programmed with Proworx NXT, a software I was unfamiliar with until now. I have been unable to locate a download link for Proworx NXT. While awaiting a response from Schneider, I am seeking guidance on where to find the necessary resources. Can anyone provide assistance on this matter?
While troubleshooting an old Schneider PC-E984-265 PLC at work, I discovered that it was programmed using Proworx NXT instead of Concept. After hitting a roadblock trying to connect, I reached out to Schneider tech support for help, but to no avail. I am now on the lookout for a download link for Proworx NXT. If anyone can provide guidance or point me in the right direction, I would greatly appreciate it.
Ram Munoz concurred, expressing their own struggle with the issue. It's been quite some time, but if memory serves me right, the customer possessed the installation files on a CD, requiring me to set up a Windows 95 virtual machine for its operation. The most troublesome part of this process was the inability to make any USB to serial drivers compatible with Windows 95. In the end, an experienced individual with a legacy computer featuring an integrated DB9 port had to make a physical appearance at the site to offer assistance. It was quite a challenging experience. Wishing you the best of luck in resolving your issue.
Ever wondered why a system is often neglected until it's too late? Find out the importance of regular maintenance and prevention to avoid costly repairs.
Navigating through older PLC models like the Schneider PC-E984-265 can definitely be a challenge, especially when it comes to software compatibility issues. Proworx NXT, as you’ve discovered, is a legacy software that's sort of hard to come across nowadays. While awaiting formal response from Schneider, I'd encourage you to peruse the PLCTalk forum, the community there is quite helpful and someone might have a spare copy or a valid link to Proworx NXT. Also, keep in mind that an old Windows XP machine would be best suited to run that software. Don't forget to set up a proper communication link between your PLC and PC using either RS232/RS485 medium. Hope this info is of help!
I've some experience working with these older PLC models. It's easy to presume they'd be programmed using the Concept software, but as you've discovered, sometimes it's not that straightforward. The unfortunate news is that Proworx NXT is considered obsolete by Schneider and is no longer available for download or purchase on their site. Your best bet would be to contact Schneider directly and see if they can provide you with a legacy copy of the software. Alternatively, you can look into other third-party sources or online auction sites, but you may have to take care of license transfer issues. Be sure to follow all legal guidelines when pursuing this route. Good luck!
I've also encountered a similar issue with an old Schneider PLC model at my workplace a while ago. I found out that Schneider Electric no longer supports Proworx NXT. You might want to consider getting a hold of an old copy from a colleague or maybe even from an online forum where controls engineers hang out. However, frequently, older PLCs like this one can also be converted to use newer, more accessible software. Make sure to fully backup your current project before attempting conversion or replacement. Better yet, if you're dealing with critical systems, it may be time to consider upgrading your PLC hardware to something that's currently supported.
Sounds like a tricky situation, mate. I've worked with both Concept and Proworx NXT before, you're not the first one to be surprised by that switch! As for a download link for Proworx NXT, Schneider's website isn't of much help nowadays since support for the software has been discontinued. But don’t despair- there are software resellers online that might carry it, or you could check with legacy automation equipment suppliers. However, be cautious when purchasing from third-party sites. Also, keep in mind that even with the right software, programming these older PLC models can be a task due to their outdated interfaces. You might want to consider upgrading to a newer PLC if possible, could save you quite the headache!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: The Schneider PLC model PC-E984-265 is typically programmed using Proworx NXT software.
Answer: The download link for Proworx NXT software can be found on the Schneider Electric website or by contacting Schneider tech support.
Answer: You can find resources for programming with Proworx NXT by visiting the Schneider Electric website, contacting Schneider tech support, or seeking assistance from online forums and communities.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.