Have you encountered this issue in Rslogix 5000 before? When attempting to access the properties and device information for the 1734-Aent, an error message stating "Error occurred while communicating with device" is displayed. This issue could arise due to communication errors within the software.
Is anyone else experiencing this issue?
I am unfamiliar with the error you are experiencing. My initial thought is that it may be related to the revision or AOP of your AENT. Can you please provide the firmware revision for the AENT and the version configured in your system? This information will help diagnose the issue more accurately.
After installing a module profile, I experienced difficulties in deleting it as the uninstall option was greyed out. This issue has impacted both Studio 5000 and Rslogix 5000, causing frustration in trying to remove the module.
After installing a module profile, Hojland experienced issues trying to delete it with no success. The uninstall option was greyed out, impacting both Studio 5000 and Rslogix 5000. To resolve this, simply run mpsetup /cu from a command line. Be cautious not to select ALL in the popup prompt to avoid unintentionally uninstalling all AOPs on your system.
I'm uncertain about the process. Could you please provide a detailed explanation?
Yes, I've come across this issue before. It seems like it might be a problem with your network configuration or a potential firewall issue blocking the communication. I'd recommend checking your Ethernet/IP configuration and ensuring all devices are configured correctly. Also, try temporarily disabling firewall to see if this resolves the issue. If none of these works, you might want to consider reinstalling RsLogix 5000 or updating it to the latest version.
Oh yes, I've experienced this issue before. It seemed to be a networking problem in my case. I traced it back to the 1734-Aent IP address - it wasn't correctly designated in RsLogix 5000, which was causing the communication error. I adjusted the settings to match the actual IP of my 1734-Aent and the problem was resolved. Try various troubleshooting steps related to network settings, it might help.
Yes, I've encountered that issue before. One solution you could try is checking the IP address configured in the 1734-AENT module. Also, make sure the module is compatible with the Rslogix 5000 version you are using. Updating your software might help if it's outdated. Lastly, check the communication path in the Rslogix 5000 IO setup. Miscommunication between the devices and the software could be triggering the error.
Yes, I've encountered this issue before. It usually happens when there is a communication glitch between RSLogix 5000 and the 1734-Aent device. There could be multiple reasons for such errors like network issues, incorrect IP configuration or perhaps it could be a simple firmware mismatch. It's best to cross verify all these probable causes one by one. Additionally, make sure you've the latest software updates installed as sometimes an outdated version can cause such problems.
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Q: What could be the possible cause of the "Error occurred while communicating with device" issue in Rslogix 5000 for 1734-Aent? The issue could be caused by communication errors within the software.
Answer: The error message "Error occurred while communicating with device" is displayed when attempting to access the properties and device information.
Answer: While not extremely common, users may encounter the "Error occurred while communicating with device" issue in Rslogix 5000 when working with 1734-Aent configurations.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.