I am interested in setting up dual monitor display for monitoring various aspects of a plant. After researching, I came across the Windows PC Mirror Target. I have attempted to add a Windows PC target and a Windows PC mirror target to my test project. However, I am facing issues with adding the "TestPC" target as the source target on the "TestMirror". Can someone please assist me with this process? Any guidance would be greatly appreciated. Thank you!
Before attempting to add the mirror, did you remember to save the TestPC project?
After experimenting for a while, I discovered that in order to select it as a target, you need to choose "View" under Windows PC, rather than Logic developer PC with the view option.
I want to mention that our setup involves utilizing two thin clients, each dedicated to a separate screen, for connecting to a virtual machine via RDP with automatic logins. As someone new to this technology, I am still figuring out how everything will integrate seamlessly.
Sure, I'm happy to help! In setting up the mirror target, make sure the source target "TestPC" is available and running before adding it. Also, verify if 'TestPC' is properly configured and has all the right permissions. If the problem persists, try restarting your system or re-installing the Windows PC Mirror Target program. It's essential that you have all updates and drivers installed for your graphics card as well. Let me know how it goes or if you need more specific assistance!
Sure, I'd be happy to help. It sounds like you're experiencing some issues in linking the "TestPC" target to the mirror display in your set up. Have you checked whether both PCs are part of the same network? Also, ensure "TestPC" is properly identified in your settings and try updating the drivers. If the problem persists, I recommend checking the detailed log for any error messages. Sometimes the issue can be resolved simply by restarting both systems. The key is to troubleshoot one thing at a time, don't rush!
It sounds like you're on the right track with setting up your dual monitor display. I've encountered a similar issue before and I resolved it by ensuring that the source PC has Remote Desktop Protocol (RDP) enabled, as the mirror process relies heavily on it. Also, double-check your firewall settings on both systems. It's mandatory that communication isn't blocked between the two systems. You might need to explicitly add your source and mirror target IPs in the firewall rules to permit communications. I hope this helps!
Hi, I've had a similar problem before and I managed to resolve it by ensuring that both targets were running the same version of Windows. If they're not, that could be the issue. You should also check if your firewalls or other security software might be blocking the connection between TestPC and TestMirror. If you’ve done all these and it’s still not working, try posting the exact error message you’re getting. That might give us a better picture of what's going wrong.
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. How do I set up a dual monitor display for plant monitoring using Windows PC Mirror Target? - To set up a dual monitor display for plant monitoring using Windows PC Mirror Target, you can add a Windows PC target and a Windows PC mirror target to your project. However, ensure that you correctly add the source target to the mirror target for successful setup.
Answer: - If you are encountering difficulties adding the "TestPC" target as the source target on the "TestMirror" in Windows PC Mirror Target setup, it could be due to incorrect configurations or settings. Double-check your setup and ensure that the source target is properly added to the mirror target.
Answer: - When setting up a dual monitor display for plant monitoring with Windows PC Mirror Target, make sure to carefully follow the recommended steps and guidelines provided by the software. This may involve adding the necessary targets, configuring settings, and ensuring proper connections between the source and mirror targets.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.