Purchased a pre-owned Q064UDEH with warranty, but struggling to configure Ethernet settings for program download. Seeking guidance on initial setup for Ethernet IP, Node, and Station addresses. Any advice is appreciated, as Mitsubishi is not my usual equipment brand.
Hello there, Asterof. Please note that the Q964uDEH does not have support for an EtherNet/IP adapter. However, you have the option to program it as a Modbus TCP server, with the Rockwell PLC acting as the Modbus TCP Client, or vice versa.
To establish a connection with USB and configure the Ethernet, you may need the GXconfigurator tool. However, it is important to note that EH/IP support may not be available.
Alfredo Quintero mentioned that the Q064UDEH model does not support EtherNet/IP adapter. However, it is possible to program it as a Modbus TCP server, with the Rockwell PLC acting as a Modbus TCP client, or vice versa. It's important to note that the Q064UDEH features a built-in Ethernet port, making it ideal for Modbus TCP communication setups.
This device is a Q064UDEH, not a Q964uDEH, equipped with a built-in Ethernet port.
Have you checked the system settings in the GX Developer? Normally for an Ethernet setup, you'd have to ensure that the local station address, network number etc., are correctly set according to your PLC IP settings. However, setting up Mitsubishi PLC systems can indeed be tricky if it's not your regular brand. Consider downloading the manual or reaching out to their tech-support who are pretty efficient to my knowledge. Also, make sure you're using a crossover Ethernet cable (just in case you're using a standard one). I hope this helps!
It sounds like you're venturing into some unfamiliar territory with the Q064UDEH! To configure the Ethernet settings, start by accessing the settings through the device's programming software. You’ll typically find the Ethernet IP settings under the network configuration menu. Make sure to set a unique IP address that matches your network's range, and don't forget to define the Node and Station addresses according to your setup—these should be consistent with your overall network plan. If you have the user manual handy, it can provide more detailed steps specific to your model, and you might also consider checking out Mitsubishi’s forums or user groups for additional tips from others who have integrated this equipment. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. How do I set up Ethernet IP on a Mitsubishi Q064UDEH for initial configuration? - To set up Ethernet IP on a Mitsubishi Q064UDEH for initial configuration, you need to configure the Ethernet settings such as Node address, Station address, and IP address. Refer to the device's user manual for specific instructions. 2. What are the key steps involved in configuring Ethernet settings for program download on a Q064UDEH? - The key steps for configuring Ethernet settings on a Q064UDEH for program download include setting the Node and Station addresses, assigning an IP address, and ensuring proper network connectivity. Consult the manufacturer's documentation for detailed instructions.
Answer: - If Mitsubishi is not your usual equipment brand and you need assistance with setting up Ethernet IP, consider reaching out to Mitsubishi technical support or referring to online forums and resources dedicated to Mitsubishi PLC programming. Training courses or workshops may also be beneficial.
Answer: - If you are facing challenges with configuring Ethernet settings on your pre-owned Q064UDEH, even with a warranty, consider contacting the seller for assistance or reaching out to Mitsubishi's customer support for troubleshooting guidance. They may be able to provide specialized support to help resolve
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.