How can I activate an external alarm through computer speakers on Factory Talk Network Distributed Edition? I am utilizing the Alarm and Events setup feature but am having trouble finding the option to select an external sound under states when double-clicking on the Alarm Banner. Any advice on how to enable this feature would be greatly appreciated.
Unfortunately, the sound box is not available as a selection.
I am not able to locate the sound box option on my device.
It's possible that this feature is not visible due to the use of an outdated software version.
Take a glance at the pair of images displayed above showcasing two distinct objects. It should be noted that while the Alarm and Event Summary object lacks a sound feature, the Alarm and Event Banner does provide support for it. OG
How can I locate the information in Factory Talk?
You may want to try integrating your external alarm with the Windows Sound Scheme in the computer that's running the Factory Talk Studio. Under Control Panel > Sound > Sounds tab, create a new sound event or alter an existing one to play your alarm. Then, script the Factory Talk Alarms and Events to trigger that specific Windows Sound Scheme event when a certain condition is met. Remember you must have access to these administrative changes though.
It sounds like you're on the right track with the Alarm and Events setup feature in Factory Talk Network. To use an external alarm sound, make sure the sound file is in a format that Factory Talk recognizes (such as .wav). Then place the file in the correct location on your computer (typically this will be your application directory). In the Properties window for the Alarm Banner, under the States tab, you should see an 'Audio' field. Enter the name of your sound file there (including the extension, like alarm.wav) to link it. Hopefully this should trigger your external alarm when the condition is met.
It sounds like you're on the right track with the Alarm and Events setup, but remember that activating an external alarm through your computer speakers may require some additional configuration outside of just the Alarm Banner settings. Make sure your audio device is correctly set as the output in your system settings. Also, check if you can assign sound files directly within your alarm configuration; sometimes, it’s a matter of linking a specific sound or event to a specific alarm state. If you haven't already, consult the documentation for your specific version of Factory Talk, as the steps may slightly differ depending on the version you're using. Good luck!
It sounds like you’re on the right track with the Alarm and Events setup! To enable an external alarm through your computer speakers, make sure you’ve checked that your alarm sound files are in the correct format and properly placed in the designated directory. When configuring the Alarm Banner, instead of looking for the sound option directly under states, try navigating to the properties section of the alarm and check under the 'Audio' settings where you might find an option to specify sound files for alarms. If you’re still having trouble, it might help to reference the Factory Talk documentation or forums for specific sound file compatibility and troubleshooting tips. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: To activate an external alarm through computer speakers, you can utilize the Alarm and Events setup feature. However, selecting an external sound option may not be straightforward. You need to find the correct setting to enable this feature.
Answer: When dealing with the Alarm Banner in Factory Talk Network Distributed Edition, the option to select an external sound for alarms might not be readily apparent. You may need to navigate through the Alarm and Events setup to find the specific setting for configuring external alarm sounds.
Answer: Enabling the external alarm sound feature in Factory Talk Network Distributed Edition involves navigating through the Alarm and Events setup. Look for the appropriate option that allows you to select an external sound to trigger when an alarm occurs.
Answer: If you are struggling to find the option to set an external alarm sound in Factory Talk Network Distributed Edition, try double-clicking on the Alarm Banner and exploring the available settings within the Alarm and Events setup. Look for a
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.