New ✨ Introducing Oxmaint Asset Hub for Machine Builders and OEMs. Explore Now

Q&A Community

How to Upload or Backup a Project from Eaton XV-102 HMI

Question:

Hello everyone, I am wondering if it is feasible to upload or backup a project from an Eaton XV-102 HMI. If so, what software should be utilized and what steps should be followed? Thank you all for your assistance!

Top Replies

There are multiple options available, but it cannot be ensured that the source code has been successfully transferred to the HMI. Explore the range of software options offered by Eaton for PLC programming and visualization, including XSOFT-CODESYS-3, XSOFT-CODESYS-2, GALILEO, and EPAM. Choose the ideal software for your engineering needs. Visit Eaton's website for more information.

I own Galileo but am struggling to discover the process for uploading data.

After referencing the manual, I came across an upload button on this webpage: https://www.eaton.com/content/dam/eaton/technicaldocumentation/mn/MN048018_EN.pdf.

More Replies

Frequently Asked Questions (FAQ)

FAQ: 1. Can I upload or backup a project from an Eaton XV-102 HMI?

Answer: - Yes, it is possible to upload or backup a project from an Eaton XV-102 HMI.

FAQ: 2. Which software should I use for uploading or backing up a project from an Eaton XV-102 HMI?

Answer: - You can use Eaton's proprietary software, such as ProSave, to upload or backup a project from an Eaton XV-102 HMI.

FAQ: 3. What are the steps to upload or backup a project from an Eaton XV-102 HMI?

Answer: - The specific steps may vary, but generally, you would connect the HMI to your computer using a suitable interface, open the ProSave software, and follow the instructions provided to upload or backup the project.

You must be a registered user to add a comment. If you've already registered,
sign in. Otherwise, register and sign in.