I recently retrieved my NAIS FP1-C40 from storage, only to find that the battery is dead and the programming has been wiped. After reaching out to the OEM for assistance, all I received were 5 diskettes (3.5) and a vague "good luck" message. It is clear that I will need to invest in a new battery and programming cable, but I am unsure about the specific type of cable required. From my research on the Panasonic website, it seems that a 232-422 converter will be necessary to connect my laptop to the PLC. Additionally, there is mention of another cable for the "tool" port. I am currently using FPSoft V1.06B and am curious if this software is compatible with Windows XP. Any guidance on this matter would be greatly appreciated.
Yes, you have the option to utilize the XP operating system.
The provided link contains all the necessary software for your PLC needs. In addition to the software, you will require two cables - one being the AFP8550 RS422/232 adapter and the other connecting to the tool port as previously mentioned. While I attempted to create one myself, I ultimately had to order it. Currently, I am using FPWINGR V2.4 to communicate with an FP1-C40 without any issues. However, I am facing difficulties when trying to establish communication with an expansion unit FP1-E40. Despite various attempts at address allocation, I have been unable to find any relevant documentation on this matter. It appears that NAIS is similar to AB in providing excessive information but lacking in useful data. Please reach out if you require further assistance. On a side note, does anyone have knowledge on how to allocate addresses for E40?
Thank you for the responses! I successfully utilized a free downloader software for the PLC program without any issues. Now I need assistance with fixing the non-responsive HMI display. Appreciate all the feedback provided.
Looking for assistance in programming NAiS PLCs? Visit CTI Automation's website to find helpful resources for Aromat NAiS PLCs. Additionally, CTI Automation offers support for NAiS HMIs with their range of Panasonic Operator Panels. Trust CTI Automation to provide the expertise you need for your automation projects.
Looking for the Pinout diagram for the NAIS FP1-C14 Programming Cable? This cable utilizes RS422 Communication to program PLCs. If you have an RS232 to 4-wire RS422 Converter, you can use it to program Mitsubishi PLCs as well. Any assistance would be greatly appreciated. Thank you in advance. Mannan from Chittagong, Bangladesh.
It sounds like you're in a bit of a quandary! For the programming cable, you would need the AFP8550 converter which converts RS232 to RS422, compatible with the NAIS FP1-C40. As for the "tool" port cable, the AFP1523 should do the trick. Now, regarding your software, FPSoft V1.06B is indeed compatible with Windows XP, so you should not have any issues there. Don't forget to implement continuous battery backup in the future to avoid such situations. Best of luck with your project!
Based on my experience with the NAIS FP1-C40, you're on the right track. You would indeed need a RS232 to RS422 converter to link with the PLC, but don't forget that the communication protocol should be selected in FPSoft to match the PLC settings. Speaking of the cable for the 'tool' port, keep in mind that the PLC requires a C40P-TOOL-CABLE for that specific port. It's often overlooked but critical for connection. As for FPSoft V1.06B, it should work fine with Windows XP, as I once used this setup without issues. However, you might also consider upgrading FPSoft as the latest versions offer improved functionality.
Sounds like you've got quite a project on your hands! You're correct about needing a 232-422 converter for interfacing with your laptop. As for the "tool" port cable, it's typically used for connecting various peripheral devices, so its exact type may depend on your specific setup. With regards to the software, FPSoft V1.06B should run on Windows XP; you might just need to set it to run in compatibility mode. Keep in mind that support for XP is pretty limited these days, so you might consider upgrading your OS for easier troubleshooting and better security. Best of luck with your reprogramming!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: - The specific type of battery required for the NAIS FP1-C40 PLC is recommended to be replaced with a new one to ensure proper functioning.
Answer: - Based on research from the Panasonic website, it is suggested that a 232-422 converter may be necessary to connect a laptop to the NAIS FP1-C40 PLC. Additionally, there may be another cable required for the "tool" port.
Answer: - Compatibility of the FPSoft V1.06B software with Windows XP is a common concern among users. It is recommended to verify compatibility or explore alternative software options for programming the NAIS FP1-C40 PLC.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.