Hello, I am seeking information on programming a job for American Axle. Can anyone share their experience with this process? How much additional time did it take to complete the project? How long did it take for you to feel confident and comfortable with the task? I recently received training from their corporate team but ended up being assigned to a different project. Currently, I am estimating a new job for a plant located in Ramos, which was previously known as an old Metaldyne plant and is now following the corporate AAM standards.
For the most recent project I completed for American Axle, I received their standardized PLC + HMI design template for the machine prior to its shipment to one of their newly acquired plants near Leon. Although the template was intended for assembly, I chose not to adhere strictly to it as it was better suited for that purpose rather than manufacturing. In line with my experience with GM projects, I recommend budgeting double or even triple the estimated time for completion to ensure compliance standards are met. This advice is based on feedback from a colleague who has also worked with American Axle in the past.
When it comes to corporate software specifications, I excel at doubling and providing straight quotes for hardware specs with one round of revisions. However, I have encountered challenges with software specifications. Often, you will not be in direct communication with the original software author, but instead collaborate with a new corporate programmer to decipher and make sense of it. This process can be complex and requires careful navigation.
Thank you for your help, team!
When dealing with a corporation, make sure to request their standard scope of work document outlining the required components for electrical, pneumatic, electrical, and hydraulic systems. This step is essential to avoid any discrepancies with the client's specifications and prevent costly design changes or programming revisions. I learned this lesson the hard way when a client rejected the components I used in their plant. So, always double-check and confirm the approved components beforehand to avoid unexpected expenses and delays. - James
Hello! I programmed a job for AAM at a different location, but my experience might still be of use. For me, the additional time taken depended a lot on the complexity of the project and unexpected issues we faced. On average, it added about 25% more to the initial timeline. It took me around 6 months to feel really confident with the task. But remember every person and project is unique, these are just my personal timelines. The transitioning from old Metaldyne standards to corporate AAM norms in Ramos may present its own set of challenges. I found that constant communication with the team and supervisors helped in navigating these transitions and uncertainties. Also, try to remain patient and open to learning opportunities. All the best!
Hello! I've programmed a few jobs for American Axle in the past and, yes, it can take some time to get comfortable with the process. In my case, it took a few weeks to fully grasp the ins and outs. Interestingly, I've also worked on projects for the plant in Ramos, which was indeed an old Metaldyne plant. Adapting to the new AAM corporate standards was a bit of a learning curve but definitely doable. Always remember, it's an iterative process and you'll gain more confidence with each attempt. I encourage you to be patient with yourself and don't hesitate to seek help from the team when needed. As for project estimation, it largely depends on the scale and complexity of the project but on average, it took me about 1.5 times longer than my normal project timelines.
Hi there! When I started programming a job for AAM after my transition to a new project, it took me around 2-3 weeks of regular work to feel comfortable with the task. It's key to understand that integrating AAM corporate standards is a steady process and it's completely okay if you require extra time. To complete the project, I needed about an additional month more than my initial estimate due to unexpected adjustments. Advise with your superiors about your needs and ensure you have complete understanding of the AAM standards to avoid possible delays. The plant in Ramos, in my experience, was pretty cooperative in following AAM standards. So although it's an old Metaldyne plant, don't worry too much. Keep in mind that communication is key, don't hesitate to reach out to your team or corporate if issues arise. Good luck!
Hey there! I worked on an AAM-based project about a year ago. From my experience, the initial setup took a bit longer than anticipated, mostly due to settling into their specific standards. However, after around two months, I became pretty confident with their process. Your recent training will likely be very helpful in this familiarization stage. Keep in mind, every plant can have slightly different nuances, even under corporate standards, so don't get discouraged if things in Ramos are a bit different from what you were initially trained on. Patience and communication with the team are key. Best of luck with your new project!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. What is the process like for programming a job for American Axle? - The process involves receiving training from the corporate team and estimating a new job following the corporate AAM standards. 2. How much additional time is typically required to complete a programming job for American Axle? - The additional time required can vary depending on the complexity of the project and individual proficiency.
Answer: - The timeframe for feeling confident and comfortable with the task can vary based on individual learning curves and experience levels.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.