Greetings everyone, I am currently planning a project involving a Leibinger Jet3up inkjet printer, which requires sending print details to the printer via Ethernet. I inquired about the availability of a Profinet version, but unfortunately, it appears that it is not an option. Has anyone had experience working with a Siemens PLC in conjunction with this specific printer for communication purposes? I anticipate utilizing PUT/GET functions to transmit control strings to the printer. Any insights or advice on this matter would be highly appreciated, as I aim to adequately prepare in advance for this project. Thank you, Aleix
Are you looking to utilize Tsend TrcvNothing on the Siemens support site for connecting printers via Ethernet to S7-1200/S7-1500? Check out the detailed guide available at https://support.industry.siemens.co...inters-via-ethernet-to-s7-1200-s7-1500/267941 for step-by-step instructions.
If you're looking to connect an industrial printer to an S7-1200 or S7-1500 PLC, it's worth reaching out to the manufacturer, especially since they are based in Germany. Given the printer's intended use in industrial applications, there's a strong possibility that they have a sample TIA project available for this specific setup. Reach out to the manufacturer for more information.
I have recently completed the process using Tsend / Trcv as specified. Make sure to obtain the Scripting and Programming manual from the manufacturer. The communication process relies on sending and receiving strings between yourself and the printer. This procedure is relatively simple and user-friendly.
Greetings, everyone! I appreciate the responses and assistance provided. I have obtained the manual from the manufacturer and am now looking to secure a sample TIA portal project for testing. I will provide an update once I begin testing. Thank you for the valuable information - it is greatly appreciated. Cheers, Aleix.
NoName stated, "Hello guys. Thank you for the responses. I have received the manual from the manufacturer that was mentioned. I will also try to reach out for a sample project of the TIA portal, if available. I will reply to you when I begin testing. Thank you again for the truly helpful information. Great as always. Hello Aleix, do you have the sample program? Thank you very much."
Hi Aleix, I've had some experience working with a Siemens PLC for controlling different printers, but not specifically the Leibinger Jet3up. However, if it accepts standard communication via Ethernet, the hassles should be minimal. Your idea to use PUT/GET functions for controlling is indeed a feasible one, but I'd suggest also exploring S7 communication, which has always been reliable in my experience. Remember to ensure that your Ethernet settings on both the PLC and the printer match perfectly. Good luck with your project!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: - Yes, it is possible to communicate with a Leibinger Jet3up printer via Ethernet using a Siemens S7-1200 PLC. The user mentioned utilizing PUT/GET functions to transmit control strings to the printer.
Answer: - The user mentioned that a Profinet version of the printer is not available.
Answer: - The user is seeking advice and insights from others who may have experience working with a Siemens PLC in conjunction with the Leibinger Jet3up printer for communication purposes.
Answer: - It is recommended to gather insights and advice from others who have experience with similar setups to adequately prepare for the project.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.