Hello everyone, I have successfully created a backup of the Project File for a Proface HMI using GP Pro-Ex software. The specific model is Proface 3280035-41AGP3500-T1-D24. I am wondering if it is feasible to transfer this Project File to a different model of Proface HMI, specifically the Proface GP-4503TPFX or GP4503TAD. Any advice or assistance on this matter would be greatly appreciated. Thank you.
To enhance your project in GP Pro-Ex, navigate to Project -> System Settings -> Display, and select "Change Display". It is possible that adjustments to screen objects will be necessary post-conversion due to varying screen resolutions.
When using GP Pro-Ex, access your project and navigate to Project, then System Settings, and finally Display, followed by "Change Display". Adjustments may be needed for screen objects due to resolution variations. Despite some initial challenges, the issues were resolved with the selection of a Force Transfer.
Hey there, good on you for creating that backup! As to your question, yes, it's possible to transfer your Project File to different Proface HMI models like the ones you've mentioned. You'll need to utilize the Project Converter function within GP Pro-Ex to ensure compatibility. However, be aware that some features of your project might not be fully compatible with the new model because of hardware differences, so you'll need to thoroughly test all functions after the conversion. Happy programming!
Hi there! Congrats on backing up your file successfully. As for your question, yes, it is usually feasible to transfer the project file between different Proface HMI models. The important thing is to ensure the other model supports the same functions and resources used in your current project. You might have to make some adjustments to fit the screen resolution difference if any, or tweak any model-specific settings. Always double-check the transferred file on the new model before proceeding with any operative task. GP Pro-Ex software does a pretty good job in supporting a wide range of HMI modules, so it's worth trying. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Can a Proface HMI project file created for one model be transferred to a different model, such as GP-4503TPFX or GP4503TAD? - Yes, it is possible to transfer a Proface HMI project file created for one model to a different model, but there may be compatibility issues that need to be addressed.
Answer: - The Proface HMI project files are created and transferred using GP Pro-Ex software.
Answer: - Yes, when transferring a project file to a different Proface HMI model, it is important to ensure compatibility between the models, adjust settings if needed, and test the functionality thoroughly.
Answer: - You can reach out to Proface technical support or forums for assistance and guidance on transferring project files between different Proface HMI models.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.