After programming my Mitsubishi FX3G PLC and successfully downloading the program, I encountered a communication issue when connecting the Mitsubishi FX2N-4DA expansion module. The PLC froze and stopped responding, causing a disruption in the system.
I have an older A/D unit and I am unsure if it is compatible with FX3 PLCs. To ensure compatibility, you should consider using a FX3U-4LC module.
While the functionality should be operational, there may be an issue with the implementation of the FROM/TO commands.
While I have successfully utilized the FX2-4DA module on the FX3U PLC, I have not yet tested it on an FX3G. However, based on feedback from other users like goghie, it is believed to be compatible. For more information on Analog Control with the MELSEC-F series PLC from MITSUBISHI ELECTRIC, visit their official website.
Sounds like a frustrating issue you're experiencing! Noticing you're using an FX3G series PLC, is your PLC firmware up-to-date? Compatibility issues might occur with older firmware versions when connecting the FX2N-4DA expansion module. It's worth considering, because this mismatch could be causing the communication errors. Also, double-check your wiring since wrong wiring can often lead to PLC malfunction. Hope this helps!
It sounds like you might be experiencing an issue with the configuration of the FX2N-4DA module, which could be conflicting with your PLC. Try checking the placement of the module in your system and confirming the jump settings are accurate. Sometimes the smallest configuration detail can throw off the entire process. If everything looks good, you might want to consider the possibility of a faulty module or a compatibility issue. Don’t forget to ensure your PLC firmware is up to date as well!
Make sure there's no problem with your program sequence. Sometimes, the problem arises due to different operating conditions between the main and expanded modules. You could try resetting your PLC and then re-upload the program. Additionally, check signal lines to ensure they are properly grounded. Interference from other electronics could cause your PLC to freeze. As a last resort, you may need to update the firmware of your Mitsubishi PLC or the expansion module itself. This should help your modules communicate better.
It sounds like you’re dealing with a frustrating issue there! Have you double-checked the wiring and communication settings between the FX3G and the FX2N-4DA module? Sometimes, mismatched parameters or improper connections can lead to those freezing issues. Additionally, ensure that you're using the right version of the software and that all modules are compatible; it might help to reset the PLC and try downloading the program again after verifying the connections. Good luck!
It sounds like you're dealing with a frustrating situation! Have you checked the wiring and the communication settings between the FX3G and the FX2N-4DA? Sometimes, a mismatch in the parameters or a loose connection can cause the PLC to freeze. Also, make sure that the FX2N module is compatible with the FX3G; those compatibility issues can lead to unexpected behavior. It's worth double-checking the manual for any specific configuration steps that might have been missed!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Q: What could be causing the communication issue between the Mitsubishi FX3G PLC and FX2N-4DA expansion module? The communication issue could be due to incorrect wiring, faulty hardware, incompatible firmware versions, or improper configuration settings.
Answer: You can start by checking the wiring connections, ensuring compatibility between the PLC and expansion module, updating firmware if needed, and verifying the configuration settings in the programming software.
Answer: In such a scenario, you can try resetting the PLC, checking for any error codes or indicators, reviewing the program logic for any issues related to the expansion module, and consulting the user manual for troubleshooting guidance.
Answer: Some common pitfalls to avoid include improper wiring connections, using outdated firmware versions, overlooking configuration settings, and neglecting to check compatibility between the PLC and expansion module.
Answer: Yes, there is a specific procedure for
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.