Hello, I am reaching out for assistance in obtaining a specific GSD file for our Mitsubishi A800-E inverter connected to PLC 1200. While trying to backup the PLC using TIA Portal software, I encountered an error message indicating "Could not determine module type Tyre Rotation (gsdml-v2.25-hms-a8nprt_2p-20130611.xml) offline." Despite downloading and installing "gsdml-v2.25-hms-a8nprt_2p-20140926.xml" from the Mitsubishi website, the error persists. I would greatly appreciate if you could provide the download link for "gsdml-v2.25-hms-a8nprt_2p-20130611.xml" or offer guidance on resolving this issue. Thank you in advance for your attention to this matter. You can reach me at [email protected]
Hello Behrouz, welcome to the forum. It seems like you may be using the wrong GSDML file, as the one you have is intended for an HMS board rather than the Mitsubishi driver. It's possible that the English site is not up to date. I found some different information on the Japanese site and have uploaded the data for your convenience. For Mitsubishi Electric FA, you can download the driver for the inverter FREQROL here.
If you're encountering issues with the A8NPRT_2P PROFINET option card, it may be due to a missing gsdml file. The A8NPRT_2P card from Mitsubishi Electric Factory Automation - EMEA offers input/output extensions and communication options for the inverter to function within a network. Visit the EMEA Mitsubishi Electric website for more information on internal options and compatibility.
AlfredoQuintero mentioned, "Hello Behrouz, welcome to the forum. It appears that you may be using the wrong GSDML file for the Mitsubishi driver, as the one you have is intended for an HMS board. It's possible that the English site is not up to date. I found some different information on the Japanese site. I have uploaded the data for your convenience. For Mitsubishi Electric FA inverter FREQROL drive equipment downloads, please refer to the link provided. Thank you for your attention."
tarik1978 pointed out that there appears to be a missing gsdml file for the A8NPRT_2P PROFINET option card by Mitsubishi Electric Factory Automation - EMEA. The internal options for this card include input and output extensions, as well as communication options to support the inverter's operation within a network. I have already acquired and installed the gsdml file in TIA Portal, but it is not functioning as anticipated. For more information, visit oremea.mitsubishielectric.com.
Siemens offers the Proneta software, which is ideal for conducting Profinet diagnostics. This advanced software is designed to analyze and troubleshoot Profinet networks efficiently.
Hi there, it seems like you might be encountering a compatibility issue between the GSD file and the TIA Portal software or PLC. The file you need isn't readily available online. Thus, I'd suggest reaching out directly to Mitsubishi's support team for assistance - they may be able to provide the necessary file or at least guide you further in resolving this problem. Also, if you haven't done so already, try updating your TIA Portal to the latest version, as this could potentially solve the compatibility issue. Hope this helps, and good luck!
Hi there, it sounds like you're having a challenging time dealing with this issue. First off, you might be dealing with a version mismatch. If you installed "gsdml-v2.25-hms-a8nprt_2p-20140926.xml" but the PLC is still looking for "gsdml-v2.25-hms-a8nprt_2p-20130611.xml", I'd suggest trying to uninstall the version you downloaded and look for the specific one the PLC is referring to. You should reach out to Mitsubishi's service support for that specific .xml file. If it's not available, it might be worth considering getting your PLC firmware updated to be compatible with the file version you have, however, you need professional guidance to do this. Technical forums or Mitsubishi specific forums might have experienced users who can guide you better, especially if they've dealt with similar problems. Good luck!
Hey there! I totally understand how frustrating those GSD file errors can be. Instead of focusing on that specific version of the file, I recommend checking if there's an updated version on the Mitsubishi website or within the TIA Portal options that might be compatible. Also, make sure the device drivers are correctly installed and up to date; sometimes that can cause compatibility issues. If you’re still stuck, reaching out to Mitsubishi support directly might give you more insights or the specific file you need. Good luck!
Hey there! It sounds really frustrating to run into those errors while trying to back up your PLC. While I don’t have the specific GSD file you’re looking for, I've found that sometimes, these issues can stem from version mismatches between the TIA Portal and the GSD files. Have you tried checking if there are any updates for your TIA Portal software? Additionally, you might want to reach out to Mitsubishi's support directly, as they may have access to that older file or can provide a workaround. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: Answer: This error message indicates a problem with obtaining the correct GSD file for the Mitsubishi A800-E inverter connected to PLC 1200.
Answer: Answer: The error persists because the specific GSD file "gsdml-v2.25-hms-a8nprt_2p-20130611.xml" is needed, and the one downloaded is not the correct version.
Answer: Answer: Unfortunately, the specific download link for the required GSD file "gsdml-v2.25-hms-a8nprt_2p-20130611.xml" may not be readily available. However, seeking assistance from Mitsubishi's support or forums dedicated to industrial automation may help in obtaining the correct file or resolving the issue.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.