Hello everyone, I am currently using an S7 1200 programmable logic controller (PLC) in conjunction with an ET 200S expansion module. I am encountering an issue where I am unable to locate the PLC when searching for accessible devices, unless I am online with the project. How can I troubleshoot and resolve this connectivity problem?
To ensure optimal performance, kindly provide screenshots of your Extended Go Online window and Accessible Devices window post-search. Additionally, please confirm if you are connected to a router for troubleshooting purposes.
It sounds like you're having quite the challenge with your S7 1200! One thing you might want to check is the network configuration, ensuring the IP address of the PLC is correctly set and that it’s on the same subnet as your PC. Also, try resetting the Ethernet module and see if that helps; sometimes a simple reboot can fix connectivity issues. If that doesn’t work, consider checking the firmware version on the PLC and making sure it’s compatible with your software. Good luck!
It sounds like you might be running into a network configuration issue. First, double-check that the PLC and the PC running the software are on the same subnet and that there are no IP address conflicts. If you're using Ethernet, make sure the cables are securely connected and that the network settings in TIA Portal match the PLC's configuration. Sometimes, simply restarting both the PLC and your PC can help reset any connection issues. Additionally, ensure that any firewalls on your PC aren't blocking the necessary ports for communication. If all else fails, consider resetting the PLC to its factory settings, then reconfiguring it from scratch.
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Why is my S7 1200 PLC not being detected when searching for accessible devices? - The issue of the PLC not being detected could be due to a connectivity problem or configuration settings.
Answer: - Possible causes for the connectivity issue include network configuration, communication settings, or software-related issues.
Answer: - To troubleshoot the connectivity problem, you can check the network connections, verify communication settings, and ensure proper configuration of the PLC and expansion module.
Answer: - The PLC being detected only when online with the project could indicate a potential software-related issue or configuration discrepancy between online and offline modes.
Answer: - You can try re-establishing network connections, verifying IP addresses, checking communication protocols, and ensuring proper programming and configuration of the devices to resolve the connectivity issue.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.