Hi there, I'm currently using cimplicity workbench and have successfully made changes to the project on this machine before. However, upon logging into the project today and attempting to access the dynamic feature, I encountered a pop-up message stating "project configured to broadcast, but not being received." I suspect the machine may have become disconnected from the network. Any suggestions would be greatly appreciated. Thank you.
Dylan Beg inquired about a problem with Cimplicity Workbench: while making changes to a project from their current machine, they encountered an error message when trying to access the dynamic feature. The message indicated that the project was configured to broadcast but not being received. It is suspected that the machine may have been disconnected from the network. Any advice on resolving this issue would be greatly appreciated. Another individual experiencing the same problem seeks a solution. Any updates on this issue?
It sounds like a problem with the network or the broadcast settings in your project. Given your suspicion, I'd first suggest verifying your network connection. If that's fine, check if the machine's IP address matches the one in your project's broadcast settings. It's easy to overlook, but these changes can sometimes occur unknowingly due to network resets or updates. I'd also recommend checking if any firewall or antivirus software is blocking Cimplicity's broadcast.
Hey there, it's indeed possible that you're experiencing network issues, however, to determine the cause, I'd suggest double-checking your Broadcast Settings in your workbench project configuration. It's also worth ensuring that the broadcast receiver machine is configured correctly to accept the broadcast and isn't having any firewall or other network related issues. In some cases, a simple restart of the system might resolve the issue as well. Good luck!
Hi there! It does sound like a network issue could be the root of your problem. One initial step you could take is checking your ethernet connection or trying to reconnect to your WiFi. If that doesn't resolve the issue, it might be that your machine's IP address has changed. In cimplicity, there's a specific section where you need to define IP addresses for broadcasting. Check to make sure the IP address listed there matches the current one on your machine. If there are any discrepancies, fix that and see if it solves your problem.
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Why am I receiving the message "project configured to broadcast, but not being received" in Cimplicity Workbench? - This message usually indicates a network connectivity issue where the project is not being received due to a network disconnection.
Answer: - The project not being received could be due to network disconnection, firewall settings blocking communication, or incorrect configuration settings.
Answer: - You can start by checking the network connection, verifying firewall settings, ensuring correct project configuration, and restarting the Cimplicity Workbench to attempt a reconnection.
Answer: - Yes, you can try manually reconnecting the project by verifying the network connection, restarting the application, and checking the project settings for any discrepancies.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.