In order to utilize my Schneider M340 controller (Unity Pro), I am looking to connect it to the FS-QS-1510 Field Server Quick Server Gateway for data reading. The connection between the gateway and PLC has been established via Ethernet, and now I need to convert the data from Ethernet to BACnet. The configuration for the gateway is done through a CSV (Excel) file. Despite watching several tutorials, I am still facing difficulties. I would greatly appreciate any assistance with this setup.
While communication has been successfully established, there seems to be an issue with transferring or receiving data in Unity Pro. Is there a specific action that needs to be taken within Unity Pro in order to enable the reading of arrays from the program? The configuration file in CSV format has been attached to the gateway server window for reference.
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. How do I connect a Schneider M340 controller to the FS-QS-1510 Field Server Quick Server Gateway for BACnet conversion? - To connect the Schneider M340 controller to the FS-QS-1510 gateway, you need to establish a connection via Ethernet and then configure the gateway to convert the data from Ethernet to BACnet.
Answer: - The configuration for the FS-QS-1510 gateway can be done through a CSV (Excel) file. Ensure that the configuration settings in the file are accurate and match the requirements of the Schneider M340 controller.
Answer: - If you are experiencing difficulties with the setup, you may need to double-check the Ethernet connection between the controller and the gateway, verify the configuration settings in the CSV file, and ensure compatibility between the devices. Consider reaching out to technical support for further assistance.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.