Attention Members, I am currently utilizing a PLC Mitsubishi Q series for my work. At the moment, I am encountering difficulties establishing communication between my PC and the PLC CPU through the USB ports. I understand that it is essential to install the appropriate driver to facilitate this communication via USB. If anyone possesses the necessary driver, kindly share it with me at [email protected] Thank you for your assistance!
After much searching, I finally found the solution to my USB driver issue. The driver is actually located within the software folder at Melsec/EasySocket/USBDriver. It's a relief to have found the solution.
Attached is the driver.
I appreciate it - you never know when those could come in handy!
Having trouble finding this specific driver? Look no further - Thanks to TMU, your search ends here!
Just a heads up, Panasonic also installs a USB driver along with their programming software without notifying users. It may take some time to discover that it has been silently installed on your system.
Hi there! From what I recall, the necessary driver for the Mitsubishi Q series PLC can usually be found on the manufacturer's official website. But before you go through the process of installing it, make sure your computer's operating system matches the specifications mentioned for the driver. However, if you still can't find the driver, shoot a quick email to Mitsubishi's support team. They're generally pretty responsive and should be able to help you out. Best of luck with your project!
Have you tried checking the Mitsubishi website for the latest driver? Sometimes downloading it directly from the manufacturer can save you a lot of headaches. Also, make sure to check your PC’s USB settings and the cable itself, as those can sometimes be the culprits. Good luck!
Have you tried checking the Mitsubishi website for the latest drivers? Sometimes the manufacturer has updated versions that work better with certain operating systems. Additionally, make sure the USB cable and ports are functioning properly by testing them with other devices. Good luck with your setup!
Hey! I remember having similar issues with my Mitsubishi Q series, and you're right about needing the right drivers. Make sure to check the Mitsubishi Electric website for the latest USB drivers—they usually offer detailed installation guides as well. If you’re still having trouble, sometimes using a different USB port or cable can make a difference too. Good luck, and I hope you get it sorted out soon!
Have you tried checking the Mitsubishi website for the latest driver? Sometimes, the official sources also have installation guidelines that can help resolve connection issues. Additionally, ensure that your USB cable is functioning properly and try using different ports on your PC. Good luck!
âś… Work Order Management
âś… Asset Tracking
âś… Preventive Maintenance
âś… Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Q: What could be causing communication issues between a PC and a Mitsubishi Q Series PLC through USB? Communication issues could be due to the lack of appropriate drivers installed on the PC, faulty USB ports, incorrect settings in the PLC configuration, or compatibility issues.
Answer: To troubleshoot USB communication problems, ensure that the correct driver is installed on the PC, check the USB ports for any physical damage, verify the PLC configuration settings, and confirm compatibility between the devices.
Answer: The driver required for USB communication with a Mitsubishi Q Series PLC can typically be obtained from the manufacturer's official website or through authorized distributors. It is important to ensure that the driver is compatible with both the PLC model and the PC operating system.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.