Hello everyone, I apologize for the basic inquiry. Before finalizing the purchase of servo motors for a project in Australia, I would like to verify a few details. We are implementing a system utilizing a 2198-DO57 drive to power an MPL-B560F-MJ72AA servo motor linked to a gearbox in North America. I am wondering if there may be any complications in obtaining 460V for the Servo Motor while operating on an input power of 415V 50HZ in Australia. Additionally, I am curious if there are any derating factors or potential issues we should be aware of beforehand. Thank you for your assistance. I have come across information suggesting that not all VFD systems are capable of converting voltage/supply voltage, which raises concerns about compatibility with the Allen Bradley Kinetix 5700 system.
The K5700 passive power supplies have a voltage range of 195-528 VAC nominal, making them suitable for basic power supply operation without any issues concerning voltage and frequency. However, a potential limitation to consider is the motor speed. Using a 415 VAC supply will result in a lower bus voltage level, restricting the motor speed compared to a 460 VAC supply. It is important to note that the K5700 platform may not support extended speed operation. If your design involves motors operating at their maximum speed, it would be advisable to investigate further into this aspect. Keep in mind that motor back EMF may affect the speed capabilities of the motor.
Thank you, Keith! Despite my limited understanding of electrical concepts, I mistakenly assumed that voltage loss would decrease torque, not speed. However, after double-checking my calculations using the formula d=v1t+1/2at^2, I am now confident that our speed capacity is more than sufficient. Thank you once again for your assistance.
Hi there! You're right in considering these potential issues. While I'm not an expert on your specific setup, I do have some experience in power conversion. The Kinetix 5700 system, to the best of my knowledge, is capable of taking an input power of 400-480V at 47-63Hz. Therefore, an input power of 415V at 50Hz is within its operational range. However, the real concern would be whether the transformer to step-up voltage from 415V to 460V (required by the Servo motor) is commercially available and efficient in your region. Also, keep in mind that continual operations at the extreme end of rated supply voltage might affect the efficiency and lifespan of the servo motor. For derating factors, these are largely dependent on things like operating temperature and altitude, among others, so you'll want to factor in your specific conditions. It would be best to consult with an expert or the manufacturer for more precise information.
Hi there! It's quite a valid concern and I'm glad you're checking beforehand. Now in relation to your query, the Allen Bradley Kinetix 5700 servo drive should not have an issue operating at 415V 50HZ. It's designed to accommodate for global voltage ranges, thus eliminating the need for transformers in many instances. However, remember that actual motor performance might be a bit derated due to the lower voltage. On the VFD issue, this specific drive - 2198-DO57 - does indeed support voltage conversion. But be like any other complex system, double-checking motor wiring, correct installation, and the fine-detail configuration can prevent any unforeseen issues. Hope this helps and feel free to ask if you have additional questions!
Hello there, it's a pleasure to assist with your query. It's always better to confirm beforehand, appreciate your diligence. Servo motors and drives function pretty well during minor voltage deviations, but a sustained drop from 460V to 415V is significant. These devices generally accommodate around a -10/+10% deviation. Beyond that, there might be issues with achieving the motors' full capabilities. Moreover, derating can be a fallback plan but might not be completely efficient given the considerable voltage difference. Your concerns regarding compatibility with the Allen Bradley Kinetix 5700 system are consequential as VFDs do vary in their ability to convert voltage. You may need to consider using a step-up transformer to get the desired voltage, or you might want to explore an alternative motor specifically rated for the Australian power standards.
Hey there, you're asking some really essential questions, so no apologies needed. Concerning your query about the voltage, it's important to remember that the Kinetix 5700 power supplies are rated for 360-480V operation. However, they're designed to accommodate the low-end tolerance of 360V which encompasses the 415V 50Hz commonly found in Australia. So, you shouldn't experience any issues in that area. As for derating factors, high ambient temperatures and high elevation might come into play, so you'll want to verify the operating conditions. Review your application's requirements and ensure they align with the Allen Bradley Kinetix 5700 system. One more thought - consulting an electrician experienced with these systems could be a handy move. Best of luck with your project!
Hey there! Great question—it's definitely important to ensure compatibility before making any purchases. The 2198-DO57 drive should be able to handle slight variations in input voltage, but operating a 460V motor with 415V might result in lower performance, so it's worth checking if the Kinetix 5700 can adequately boost the voltage or if you'll need a transformer. Also, keep an eye on the derating factors, especially related to temperature and continuous duty cycles in Australian conditions. Lastly, don't forget to reach out to the manufacturer for any specific recommendations or compatibility confirmations based on your exact setup; they can often provide insights that might not be widely documented. Good luck with your project!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: Answer: It is essential to consider potential complications and derating factors when using a 460V servo motor with a 415V 50Hz input power in Australia. Compatibility issues may arise due to differences in voltage and frequency requirements.
Answer: Answer: Not all VFD systems are capable of converting voltage or supply voltage, which can impact the compatibility of the Kinetix 5700 system with specific power inputs. It is advisable to verify compatibility and potential derating requirements beforehand.
Answer: Answer: Operating a system with these components in Australia may require careful consideration of voltage compatibility, potential derating factors, and the ability of the equipment to function effectively with the specified input power of 415V 50Hz.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.