Looking for an upgrade CD for GE Fanuc VersaPro 2.0 software to program an IC200UEX164 64-point (40) 24Vdc In; (24) Relay Out? Unfortunately, my current VersaPro 2.0 version does not support the IC200UEX164. Any assistance would be greatly appreciated.
If you are using VersaMax Micros with 64 points, it may be time to consider migrating to Proficy Machine Edition as VP is now considered obsolete. Reach out to your local distributor to inquire about potential upgrade discounts. Special pricing and incentive programs may be available for transitioning to Machine Edition, which was introduced over fifteen years ago.
Unfortunately, it seems that this project is coming to an end as I cannot afford new programming software. However, I am determined to search for an alternative plc that is compatible with my current software. I appreciate the assistance provided.
A budget-friendly option of Proficy Machine Edition is available, specifically designed for use with VersaMax Micro and Nano products. This version was previously priced at a lower cost, making it a cost-effective choice for users. For more information, please reach out to your authorized distributor.
Thank you for the information, but I have decided to sell the PLC I currently own on eBay. I will then proceed to purchase a PLC that is compatible with my software. It is important for me to keep costs low for my customers, which is why I may not consider using a GE Micro PLC again in the future.
Bom dia! Gostaria de saber como modificar o alcance de um sinal de entrada analógica no software VersaPro.
Hey there, I understand your struggle. Upgrading from VersaPro 2.0 could be a bit complex due to outdated support. However, have you considered using Proficy Machine Edition? It provides full support for newer units like IC200UEX164 and makes programming these modules a breeze. Plus, it’s consistently updated which means you'll keep up with the latest enhancements. Just make sure you cross-check its compatibility with your system before proceeding.
While I understand your predicament and the need for an upgrade, I'm afraid your chances of finding an upgrade CD for VersaPro 2.0 might be slim nowadays. If it were me, I would recommend contacting GE directly or reaching out to an authorized GE Fanuc distributor for assistance. They might be able to guide you to an upgraded software version which supports IC200UEX164. Additionally, you could consider forums or groups dedicated to this sort of software—someone might have a spare or know how to navigate this issue.
I suggest contacting GE Fanuc directly as they would be the most reliable source to obtain the upgrade you need. You could also search for retail sites or auction pages like eBay for secondhand software. Just remember to check the software compatibility with your IC200UEX164 system before making a purchase to avoid any compatibility issues down the line. Lastly, you may also consider checking with automation professionals in forums like this or on LinkedIn, someone might have the VersaPro version you need and would be willing to help out.
Hey there! I believe getting an upgrade might indeed fix your compatibility issue. However, you may want to consider contacting GE directly to ensure you get the most appropriate solution. They were extremely helpful when I encountered a similar issue. Alternatively, you can also check out independent distributors like eBay or Amazon for the upgrade CD. Make sure to verify the seller's reliability before purchasing though!
It sounds like you're dealing with quite the challenge! Given that VersaPro 2.0 doesn’t support the IC200UEX164, you might want to consider upgrading to the latest version of Proficy Machine Edition, which is the current software for GE Fanuc systems. You could also check online forums or user groups specific to GE Fanuc, as there are often users who might have the upgrade CDs available or could offer helpful tips. Good luck!
Have you checked with Emerson or GE Fanuc's customer support? They might be able to provide a digital download link for a compatible upgrade, or even direct you to a distributor who has the CD you're looking for. Sometimes, user forums or groups dedicated to GE Fanuc products can also have leads on where to find older software versions or upgrades that are still supported. Good luck!
✅ Work Order Management
✅ Asset Tracking
✅ Preventive Maintenance
✅ Inspection Report
We have received your information. We will share Schedule Demo details on your Mail Id.
Answer: 1. Q: Can I upgrade my GE Fanuc VersaPro 2.0 software to support programming the IC200UEX164? Yes, an upgrade CD is available to enable programming of the IC200UEX164 64-point (40) 24Vdc In; (24) Relay Out module. 2. Q: How can I obtain the upgrade CD for my VersaPro 2.0 software? You can contact GE Fanuc or authorized distributors to inquire about purchasing the upgrade CD for your software. 3. Q: What features does the IC200UEX164 module offer that require software upgrade? The IC200UEX164 module has specific configuration and programming requirements that are not supported by earlier versions of VersaPro software, necessitating the upgrade.
Answer: It's important to ensure that your system meets the minimum requirements for the upgraded software version and that any existing projects are backed up before proceeding with the upgrade.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.